ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in   

rubber is completely solidified

 
Post new topic   Reply to topic    Ninja Fortress Forum Index -> Ninja Gaiden 3: Razor's Edge
View previous topic :: View next topic  
Author Message
qizhen111
Superior Ninja
Superior Ninja


Joined: 09 Apr 2017
Posts: 701



PostPosted: Sun Jul 23, 2017 7:52 pm    Post subject: rubber is completely solidified Reply with quote

<p>shake, shake 30 times. 2, the gap between the door frame and the door opening styrofoam into the inside, around the three points above, two or three. 3, glue should be uniform, injection glue area is about: door thickness * (150mm-200mm) can. The fifth step: 1, fired rubber is completely solidified, will remove the wedges, wood supports. 2. The door locks and hinges are installed on the door leaf. 3. Install the lock buckle on the door frame. 4. The door fan is </p>
<p>installed on the door frame. 5, debugging door opening, test is flexible. The sixth step: 1, install the door line. 2, install the door line to add the glue in the frame slot. 3, install the door line, first install both sides of the mouth line, and then install the upper line. 4, if the installation, tenon, groove with too tight, you can line the door of the tenon with hand plane for processing. Remember not to hit hard, especially the upper line. 5, after installation, the door to conduct </p>
<p>a comprehensive inspection and debugging, to ensure the installation quality of the product. 6, finally, with the wall and matching silicone on the door closing line and wall and floor junction, the user can also be used to shut the mortar, depending on the situation. The bathroom (toilet renovation renderings) must be shut to the door wall, ground line and the junction with silica gel. Solid wood door installation notes 1, after measuring water on the door, should </p>
<p>rubber railroad ties for playgrounds<br />
ideas for railing outside curved stairs<br />
fenced around the perimeter costs in philippine</p>
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Ninja Fortress Forum Index -> Ninja Gaiden 3: Razor's Edge All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group