maintain stainless steel cabinets

[qizhen111]

<p>Usually, after cooking, we should scrub it in time to avoid long-term contact with alkaline substances. If it has only some dust, oil, salt and vinegar on the surface, we only need to use warm water and soap to clean it; if it has some stubborn stains on the surface, we need to use professional neutral detergent to clean it. , but do not wipe directly plastic wood bathroom singapore with brushes, steel balls, etc., which will leave scratches or erosion on its surface. If its surface is branded, stickers, etc., we can use warm water / weak detergent + Wipe with alcohol/organic solvent.</p><p> And we must ensure the dryness of the countertop, so as to avoid its Fire Resistant Wall Panel in Philippine long-term contact with water, it can prevent it from cracking and other problems. If there is a protective film on the surface just after installation, we need to remove this protective film in time. If the surface of the protective film is glued, then we Plastic Wall Panel Coverings Chicago can wipe it off with a soft cloth and some banana water. This will prevent the protective film from appearing later.</p><p> We should try to avoid the hot pot when cooking. A hot plate such as a hot plate is in direct contact with it. We should place some insulation pads on its surface to reduce the damage to the stainless steel table and prolong its service life. And we should avoid direct contact between sharp objects and stainless steel countertops to prevent scratches on the countertops. For seasonings such as oily salt and vinegar, it is best to store them in special utensils, which not only unfinished maple flooring find agent in Australia facilitates cooking, but also reduces the contact between them and the table top.</p>